Skip to content

UI

SMPTE 2110 UX

SMPTE 2110 UI

You can configure you SMPTE 2110 Media Server's outputs in the Edit Media Server window.

Specific 2110 output fields are:

  • Interface IP: The IP interface from which the stream is sent.
  • Stream IP and Port: Multicast IP address and port of the stream.
  • Redondancy: Enable this parameter to send a second identical stream from another interface to another Multicast address.
  • Sampling: One of YCbCr-4:2:2, YCbCr-4:4:4, RGB.
  • Color depth: bit depth.
  • Frequency: Stream frequency. If the frequency is not an integer, it should be expressed as an irreductible fraction (i.e. 24000/1001 for 23.976fps).
  • Link delay: Expressed in microseconds. May be used by the receiver to synchronize all incoming streams.

Note: All streams must share the same frequency.

Receiver

You must match your receiver incoming stream parameters with Onlyview SMPTE 2110 ouput's ones. To help you in this task, you can find the generated SDP in the Media Server log file.