Skip to content

Matrix Switcher

Matrix Switcher

Overview

The Matrix Switcher device enables OnlyView to control professional video matrix switchers via TCP/IP network connection. This allows remote switching of video routing configurations and management of switching presets during shows.

Category: Communication Device
Hardware Requirements: Network interface connected to matrix switcher
Software Requirements: None (protocol handled internally)
Compatibility: Barco Matrix Pro HD-SDI, BlackMagic VideoHub

Setup and Configuration

Network Configuration

Device Type: Select your matrix switcher model from the dropdown: - Barco Matrix Pro HD-SDI: Professional video matrix with HD-SDI inputs/outputs - BlackMagic VideoHub: BlackMagic's video routing switcher series

IP Address: Enter the IP address of your matrix switcher. The device must be accessible on the same network as OnlyView.

Connection Process

  1. Ensure your matrix switcher is connected to the network and powered on
  2. Configure the switcher's IP address according to your network setup
  3. In OnlyView, add the Matrix Switcher device and enter the correct IP address
  4. OnlyView will automatically connect and discover the switcher's configuration (number of inputs/outputs, current routing, labels)

Actions

Available Actions

Take Preset: Recall a previously saved routing configuration. - Parameters: Preset name (selected from available presets) - Usage: Execute complex routing changes instantly during show operations

Timeline Integration

Matrix Switcher actions can be triggered from Command Cues on any timeline: 1. Add a Command Cue to a timeline layer
2. Set the cue's device action to "Take Preset" 3. Select the desired preset from the dropdown list 4. The routing change will execute when the timeline playhead reaches the cue

User Interface

Device Widget

The Matrix Switcher device widget provides the following control and monitoring:

Status Indicators: - Connection Status: Visual indicator showing network connection to the matrix switcher - Device Name: Displays the connected switcher's model name

Routing Grid: Interactive visual grid showing current signal routing: - Inputs: Listed vertically on the left side - Outputs: Listed horizontally across the top - Crosspoints: Click to change routing connections - Current Routes: Visual indicators showing active signal paths

Preset Management: - Preset Dropdown: Shows all available routing presets - New: Create a new preset based on current routing configuration - Save: Update the selected preset with current routing state - Take: Immediately execute the selected preset routing - Delete: Remove the selected preset from memory

Preset System

Creating Presets: 1. Configure desired routing using the grid interface or external switcher controls 2. Click "New" to create a new preset 3. Enter a descriptive name for the routing configuration 4. Click "Save" to store the preset

Managing Presets: - Edit Routing: Make routing changes via grid clicks or switcher front panel - Update Preset: Select existing preset and click "Save" to update with current routing - Recall Preset: Select preset from dropdown and click "Take" for instant switching

Label Management: - Input and output labels are automatically synchronized from the switcher - For compatible switchers, labels can be edited directly through OnlyView - Custom labels improve preset readability and operational efficiency